100G QSFP28 ZR4 with dual CDR 80 km, λ1296-1309 nm, LC-Duplex, Singlemode
- int. Mux
- 80 km
- 103.12 G
- LC
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | ZR4 |
Distance | 80 km |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 103.12 Gbit/s |
Bandwith Per Lane | 25.78 Gbit/s |
---|---|
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 5.5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 28.9 dB |
Transmit min/max per lane | 2 dBm / 6.5 dBm |
Receiver min/max per lane | -26.9 dBm / 2 dBm (overload) @100G |
---|---|
Wavelength TX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
Wavelength RX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
Laser | EML |
Receiver Type | SOA + PIN |
Modulation | NRZ @100G |
Extinction Ratio | 8 dB |
Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista QSFP-100G-ERL4 compatible
- Cisco Systems QSFP-100G-ER4L-S compatible
- Edge Core ET7402-ZR4 compatible
- Extreme 100G-LR4-QSFP10KM compatible
- Huawei QSFP-100G-ER4-Lite compatible
- Juniper QSFP-100G-ER4L compatible
- Nokia (ex. Alcatel-Lucent) 3AL82152AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE10550AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE11239AA compatible
- RAD QSFP28-5D compatible
- Arista 3rd_Party QSFP-100G-ERL4 compatible
What customers say
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!