25G SFP28 Auto-Tunable DWDM LR with dual CDR 10 km, 50 Channels, 100GHz Grid, C-Band, LC-Duplex, Singlemode
- DWDM 100GHz
- 10 km
- 25.78 G
- Auto-Tunable
- 10G ETH
- 25G ETH
- CPRI
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Matching Products
Specification
Form Factor | SFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode DWDM 100GHz |
Type | LR |
Distance | 10 km |
Temperature Range | -20°C - 85°C |
Bandwidth | 9.83 Gbit/s - 25.78 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 2.5 W |
---|---|
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 16 dB |
Transmit min/max per lane | 0 dBm / 4 dBm |
Receiver min/max per lane | -16 dBm / -2 dBm (overload) |
Wavelength TX (Typical) | tunable DWDM 100GHz |
TX Tunable Range | 1529.55 - 1568.77 nm |
---|---|
Wavelength RX (Range) | 1529.5 - 1568.8 nm |
Laser | ILMZ |
Receiver Type | APD |
Modulation | NRZ |
Chromatic Dispersion Tolerance | 0 ps/nm to 200 ps/nm |
Extinction Ratio | 7 dB |
Supported Protocols | 25G Ethernet, 10G Ethernet, LTE 10.137G CPRI |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems SFP-10/25G-LR-S compatible
What customers say
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.