2x 400G Finned-Top OSFP FR4 with dual CDR 2 km, λ1272-1332 nm, LC-Duplex, Singlemode

Universal Finned-Top OSFP Transceiver
Use FLEXBOX in combination with FLEXSOX to configure to almost any vendor
For 400GBASE-FR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 2x 425 Gbit/s
Up to 2 km via Singlemode OS2
2x LC-Duplex Connector
Specs
  • int. Mux
  • 2 km
  • 2x 425 G
  • LC
Protocols
  • 100G ETH
  • 200G ETH
  • 2x 400G ETH
  • 400G ETH
  • 800G ETH
Request compatibility
Part number
O.164HG2.2.C
Availability
On request

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Power Budget
2x 400G Finned-Top OSFP LR4 with dual CDR 10 km, λ1271-1331 nm, LC-Duplex, Singlemode 
2x 400G Finned-Top OSFP LR4 with dual CDR | 10 km, λ1271-1331 nm, LC-Duplex, Singlemode
0 pcs in stock 2,883.25 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
30 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor OSFP
Connector / Polish 2x LC-Duplex PC
Interface Singlemode
Compliance Code 2x FR4
Distance 2 km
Temperature Range 0°C - 70°C
Lane Count 8x (Tx/Rx)
Bandwidth 2x 425 Gbit/s
Bandwith Per Lane 106.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 16 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 4.9 dB
Transmit min/max per lane 0.3 dBm / 3.7 dBm
Receiver min/max per lane -4.6 dBm / 3.5 dBm (overload) @400G
Wavelength TX (Typical) 1271.5 nm, 1271.5 nm, 1291.5 nm, 1291.5 nm, 1311.5 nm, 1311.5 nm, 1331.5 nm, 1331.5 nm
Wavelength RX (Typical) 1271.5 nm, 1271.5 nm, 1291.5 nm, 1291.5 nm, 1311.5 nm, 1311.5 nm, 1331.5 nm, 1331.5 nm
Laser EML
Receiver Type PIN
Modulation PAM4 @400G
Transmit and Dispersion Penalty 3.4 dB
Extinction Ratio 3.5 dB
Supported Protocols 2x 400G Ethernet, 800G Ethernet, 400G Ethernet, 200G Ethernet, 100G Ethernet

Configure Transceiver Using Your FLEXSOX

It's that easy to use
1. Slide-In
2. Insert A Transceiver
  • Insert a Universal Transceiver into the corresponding slot
3. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
4. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXSOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz Head of Network, STRATO AG
On more than one occasion the flexbox significantly saved time for me by not having to scrub a deployment session but simply reconfigure a transceiver and carry on. This alone is a good reason that secures the flexbox a non-negotiable place in my datacenter-go-bag. However what really sets flexoptix apart is not them solving an irritating problem we all know. No. It is their vast inventory and know-how paired with impeccable QA. If I have a need for transceivers it is my single go-to source for procurement. They have exactly what I need in stock even before I know I need it, and when I need it, I can trust the order is in my hands in no time. Every single time. I can configure and deploy without doubt and without delay. It is rare to find such a valuable and dependable partner that reliably takes away a whole set of problems while offering decent pricing and a customer support that is above reproach.
Michael Horn Telecommunications Infrastructure Security Professional
For years we struggled with hundreds of transceivers from different vendors but this is finally over! With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle Director Infrastructure Services, Avira Operations GmbH & Co.KG

When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.

Stefan Lieven Teamleitung EDV / Pflegeheime Esslingen
More