400G OSFP PLR4 with dual CDR10 km, 4x λ1311 nm, MTP/MPO-12 APC, Singlemode

400G OSFP PLR4 with dual CDR | 10 km, 4x λ1311 nm, MTP/MPO-12 APC, Singlemode
O.134HG.10
OSFP
PLR4
  • Universal OSFP Transceiver
  • Use FLEXBOX in combination with FLEXSOX to configure to almost any vendor
  • For 400GBASE-PLR4 Ethernet links
  • Integrated Clock-Data-Recovery (CDR)
  • PAM4 modulated signal
  • Supported Data Rates: 425 Gbit/s (4x 106.25 Gbit/s)
  • Up to 10 km via Singlemode OS2
  • Use ONLY with MTP/MPO-12 APC connectors
Specs
4x 1311 nm 10 km 425 G MTP/MPO-12
Protocols
100G ETH 400G ETH
Choose config method
Compatible to

* Required Fields

Part number
O.134HG.10
Availability
on request
Your price
2,965.87 EUR
Excl. 19% Tax
You can create a quote from your cart.
Just click CREATE QUOTE.

Specification

  • Form factor
    OSFP
  • Connector / Polish
    MTP/MPO-12 APC
  • Interface
    Singlemode
  • Type
    PLR4
  • Distance
    10 km
  • Temperature range
    0°C - 70°C
  • Lane Count
    4x (Tx/Rx)
  • Bandwidth
    425 Gbit/s
  • Bandwidth per Lane
    106.25 Gbit/s
  • Digital Diagnostic Management (DDM)
    Yes, internally calibrated
  • Power Consumption
    10 W
  • CDR
    TX and RX
  • SGMII
    No
  • Inbuilt FEC
    No
  • Powerbudget (dB)
    6.3 dB
  • Transmit min/max per lane
    -1.9 dBm / 4.8 dBm
  • Receiver min/max per lane
    -8.2 dBm / 4.8 dBm (overload)
  • Wavelength Tx (typical)
    4x 1311 nm
  • Wavelength Tx (range)
    1304.5 - 1317.5 nm
  • Wavelength Rx (typical)
    4x 1311 nm
  • Laser
    EML
  • Receiver Type
    PIN
  • Modulation
    PAM4
  • Transmit and Dispersion Penalty
    3.4 dB
  • Extinction Ratio
    3.5 dB
  • Protocols
    100G Ethernet, 400G Ethernet

How to configure transceiver using your FLEXSOX

Slide your FLEXSOX into your FLEXBOX

1 Slide-In

  • Slide your FLEXBOX V4 into your FLEXSOX
  • Connect it via USB
  • Start our FLEXOPTIX App

Insert a Universal Transceiver

2 Insert a transceiver

  • Insert a Universal Transceiver into the corresponding slot
Select and Configure

3 Select and configure

  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use With Device

4 Use with device

  • Use the transceiver in your device.
    That's it!
  • Need it for another device?
    Just re-configure it again and again!

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility
is missing?

What Customers say

  • "Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver"
    Mike Dallaway
    Mira 2014 Limited
  • "Working with the FLEXOPTIX Transceivers and FLEXBOX is not only uncomplicated but offers us the possibility of working with many vendor types to support the different campus networks. Thanks guys - awesome work."
    Brian Masiga
    Network Engineer, Research and Education Network for Uganda
  • "Now that I’m done configuring my equipment, I use FLEXBOX to impress associates. I’m an IT Hero just for the savings, not to mention the FLEXibility to stock one type for each adapter. Keep up the good work!"
    Nikos Papandreou
    Dipl. Civil Engineer acting as IT Admin/SQL Dev, Geitonas School SA
More