400G QSFP-DD Coherent Tunable DWDM ZR with dual CDR 120 km*, C-Band, LC-Duplex, Singlemode
Tx & Rx wavelength required to be the same (one local oscillator)
- Coherent DWDM
- 120 km
- 425 G
- Tunable
- 400G ETH
Specification
| Form Factor | QSFP-DD |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode DWDM |
| Compliance Code | ZR |
| Distance | 120 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 425 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 18 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 4 dB |
| Transmit min/max per lane | -10 dBm / -8 dBm |
| Receiver min/max per lane | -12 dBm / 0 dBm (overload) @400G |
| Wavelength TX (Typical) | tunable Coherent DWDM |
| TX Tunable Range | 1528.77 - 1567.13 nm |
|---|---|
| Wavelength RX (Range) | 1528.8 - 1567.1 nm |
| Laser | EML |
| Receiver Type | Coherent |
| Modulation | DP-16QAM @400G |
| Transmit and Dispersion Penalty | 0.5 dB |
| Chromatic Dispersion Tolerance | 0 ps/nm to 2,400 ps/nm @400G |
| Supported Protocols | 400G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Juniper QDD-400G-LR4-10 compatible
- Juniper QDD-400G-ZR compatible
- Juniper QSFP-DD 400G-FR4 compatible
What customers say
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!