400G QSFP-DD ER8 with dual CDR 40 km, λ1274-1309 nm, LC-Duplex, Singlemode
- int. Mux
- 40 km
- 425 G
- LC
- 400G ETH
-
Alternatives
-
Matching Products
Our order confirmation will provide the final shipping date.
-
~Apr 26, 2024+11 pcs
-
~May 10, 2024+50 pcs
-
~May 28, 2024+20 pcs
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP-DD |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Type | ER8 |
Distance | 40 km |
Temperature Range | 0°C - 70°C |
Lane Count | 8x (Tx/Rx) |
Bandwidth | 425 Gbit/s |
Bandwith Per Lane | 53.13 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 15.4 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 18 dB |
Transmit min/max per lane | -0.6 dBm / 5.6 dBm |
Receiver min/max per lane | -18.6 dBm / -4.4 dBm (overload) |
Wavelength TX (Typical) | 1273.5 nm, 1277.9 nm, 1282.3 nm, 1286.7 nm, 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
Wavelength RX (Typical) | 1273.5 nm, 1277.9 nm, 1282.3 nm, 1286.7 nm, 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
---|---|
Laser | EML |
Receiver Type | APD |
Modulation | PAM4 |
Transmit and Dispersion Penalty | 3.4 dB |
Extinction Ratio | 6 dB |
Supported Protocols | 400G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!