200G QSFP-DD LR4 with dual CDR 10 km, λ1296-1309 nm, LC-Duplex, Singlemode
- int. Mux
- 10 km
- 212.4 G
- LC
- 200G ETH
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP-DD |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Type | LR4 |
Distance | 10 km |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 212.4 Gbit/s |
Bandwith Per Lane | 53.1 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 10.8 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 6.3 dB |
Transmit min/max per lane | -3.4 dBm / 5.3 dBm |
Receiver min/max per lane | -9.7 dBm / 5.3 dBm (overload) |
Wavelength TX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
Wavelength RX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
---|---|
Laser | EML |
Receiver Type | PIN |
Modulation | PAM4 |
Transmit and Dispersion Penalty | 3.2 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 200G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.