2x 100G QSFP-DD CWDM4 with dual CDR 2 km, λ1270-1330 nm, CS-Duplex, Singlemode
- int. Mux
- 2 km
- 2x 103.12 G
- CS
- 100G ETH
- 200G ETH
- 2x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP-DD |
|---|---|
| Connector / Polish | 2x CS-Duplex UPC |
| Interface | Singlemode |
| Compliance Code | 2x CWDM4 |
| Distance | 2 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 103.12 Gbit/s |
| Bandwith Per Lane | 25.78 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 3 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 3.3 dB |
| Transmit min/max per lane | -4 dBm / 2.5 dBm |
| Receiver min/max per lane | -7.3 dBm / 2.5 dBm (overload) @100G |
| Wavelength TX (Typical) | 1270 nm, 1270 nm, 1290 nm, 1290 nm, 1310 nm, 1310 nm, 1330 nm, 1330 nm |
| Wavelength RX (Typical) | 1270 nm, 1270 nm, 1290 nm, 1290 nm, 1310 nm, 1310 nm, 1330 nm, 1330 nm |
|---|---|
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @100G |
| Transmit and Dispersion Penalty | 3 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 100G Ethernet, 200G Ethernet, 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.