800G QSFP-DD 2x DR4 LPO 500 m, 8x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
- 8x 1311 nm
- 500 m
- 2x 425 G
- MTP/MPO-8/12
- 2x 400G ETH
- 4x 200G ETH
- 800G ETH
- 8x 100G ETH
Specification
| Form Factor | QSFP-DD |
|---|---|
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Singlemode |
| Compliance Code | 2x DR4 |
| Operating Temperature | Standard |
| Distance | 500 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 425 Gbit/s |
| Bandwidth Per Lane | 106.25 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 8.5 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 3 dB |
| Transmit min/max per lane | -2.9 dBm / 4 dBm |
| Receiver min/max per lane | -5.9 dBm / 4 dBm (overload) @800G |
| Wavelength TX (Typical) | 8x 1311 nm |
|---|---|
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 8x 1311 nm |
| Laser | SiPho MZ |
| Receiver Type | PIN |
| Modulation | PAM4 @800G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 2.5 dB |
| Supported Protocols | 2x 400G Ethernet, 4x 200G Ethernet, 800G Ethernet, 8x 100G Ethernet |
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling.
The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The FLEXBOX is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.