400G QSFP-DD Multirate High-power Coherent Tunable DWDM with FEC ZR/ZR+ with dual CDR 450 km, C-Band, Tx 1dBm, LC-Duplex, Singlemode
200G with 16-QAM modulation
* 450 km on amplified links
Tx & Rx wavelength required to be the same (one local oscillator)
- Coherent high-power DWDM
- 450 km
- 425 G
- Tunable
- 100G ETH
- 200G ETH
- 300G ETH
- 400G ETH
- 4x 100G ETH
Specification
| Form Factor | QSFP-DD |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode high-power DWDM |
| Compliance Code | ZR/ZR+ |
| Operating Temperature | Standard |
| Distance | 450 km |
| Temperature Range | 0°C - 75°C |
| Bandwidth | 425 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 22 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | Yes, cFEC, OFEC |
| Powerbudget (dB) | 13 dB |
| Transmit min/max per lane | -10 dBm / 1 dBm |
| Receiver min/max per lane | -12 dBm / 0 dBm (overload) @400G |
| Wavelength TX (Typical) | tunable Coherent high-power DWDM |
| TX Tunable Range | 1528.77 - 1567.13 nm |
| Wavelength RX (Range) | 1528.8 - 1567.1 nm |
|---|---|
| Laser | SiPho MZ |
| Receiver Type | Coherent |
| Modulation | DP-16QAM @400G |
| OSNR | 24 dB/0.1nm @400G |
| Supported Protocols | 300G Ethernet, 4x 100G Ethernet, 400G Ethernet, 200G Ethernet, 100G Ethernet |
| CMIS Version | 5.2 |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.