2x 400G QSFP-DD VR4 with dual CDR 50 m, 8x λ850 nm, MTP/MPO-8/12 APC, Multimode
- 8x 850 nm
- 50 m
- 2x 425 G
- MTP/MPO-8/12
- 100G ETH
- 2x 400G ETH
- 400G ETH
- 800G ETH
- 8x 100G ETH
Specification
| Form Factor | QSFP-DD |
|---|---|
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Multimode |
| Compliance Code | 2x VR4 |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 50 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 425 Gbit/s |
| Bandwidth Per Lane | 106.25 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 15 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 1.7 dB |
| Transmit min/max per lane | -4.6 dBm / 4 dBm |
| Receiver min/max per lane | -6.3 dBm / 4 dBm (overload) @400G |
| Wavelength TX (Typical) | 8x 850 nm |
| Wavelength TX (Range) | 842 - 948 nm |
|---|---|
| Wavelength RX (Typical) | 8x 850 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 4.4 dB |
| Extinction Ratio | 2.5 dB |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 8x 100G Ethernet, 400G Ethernet, 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.