2x 1G CSFP BiDi LX Industrial 10 km, 2x ᵀˣ1310 / 2x ᴿˣ1490 nm, DDM, LC-Simplex, Singlemode
- int. Mux
- 10 km
- 2x 1.25 G
- Industrial
- 100M ETH
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | CSFP |
|---|---|
| Connector / Polish | 2x LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | 2x BiDi LX |
| Distance | 10 km |
| Temperature Range | -40°C - 85°C |
| Lane Count | 2x (Tx/Rx) |
| Bandwidth | 2x 125 Mbit/s - 2x 1.25 Gbit/s |
| Bandwith Per Lane | 125 Mbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 2 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 10.5 dB |
| Transmit min/max per lane | -9 dBm / -3 dBm |
| Receiver min/max per lane | -19.5 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 2x 1310 nm |
| Wavelength TX (Range) | 1260 - 1360 nm |
|---|---|
| Wavelength RX (Typical) | 2x 1490 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Extinction Ratio | 6 dB |
| Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems GLC-2BX-D compatible
- Keymile 37973150 compatible
- Nokia (ex. Alcatel-Lucent) 3FE68720AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE08313AA compatible
What customers say
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.