100G CFP2 LR4 with dual CDR 10 km, λ1296-1309 nm, LC-Duplex, Singlemode
- int. Mux
- 10 km
- 111.8 G
- 100G ETH
- OTU4
Specification
| Form Factor | CFP2 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | LR4 |
| Distance | 10 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 103.12 Gbit/s - 111.8 Gbit/s |
| Bandwith Per Lane | 25.78 Gbit/s - 27.95 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 6 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 6.3 dB |
| Transmit min/max per lane | -4.3 dBm / 4.5 dBm |
| Receiver min/max per lane | -10.6 dBm / 4.5 dBm (overload) @100G |
| Wavelength TX (Typical) | 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm |
| Wavelength RX (Typical) | 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm |
|---|---|
| Laser | EML |
| Receiver Type | PIN |
| Modulation | NRZ @100G |
| Transmit and Dispersion Penalty | 1.5 dB |
| Extinction Ratio | 4 dB |
| Supported Protocols | 100G Ethernet, OTU4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Brocade 100G-CFP2-LR4-10KM compatible
- Extreme 4050-00083-01 compatible
- Huawei OSN010N09 compatible
- Juniper CFP2-100GBASE-LR4 compatible
- Nokia (ex. Alcatel-Lucent) 1AB426470001 compatible
- Nokia (ex. Alcatel-Lucent) 3HE08217AA compatible
- Ribbon (ex. ECI) OTR100P2_LR4 compatible
- VSS monitoring CFP2 LR4 compatible
What customers say
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)