P.1596.A.R - Application & Design of using 100km CDR SFP+

We already described the CDR feature in Why using CDR / 3R / Clock-Data Recovery. With our you are able to transmit up to 100km (26dB). Yes, I know: Why are you writing "up to 100km"? Is the question everyone has in mind while reading this sentence. That is exactly what this article is about. We need to define some technical parameters and I would like to tell you what we already tested.

Additional technical parameters

  • Power Budget: 26 dB
  • Dispersion Tolerance: -500ps/nm to 1.600ps/nm
  • Transmitter Dispersion Penalty @1600ps/nm: 3.5 dB
  • Bit-error-ratio (BER): 10^-12 @10.3 Gbit/s with PRBS 2^31-1 and OSNR > 30dB

Explanation

This means, that the guaranteed power budget is 26dB but the dispersion tolerance is only 1.600ps/nm. Standard G.652 Singlemode Fibers have 18ps/km Chromatic Dispersion which leads to 88km with a dispersion tolerance of 1.600ps/nm. If you have a dispersion optimized fiber you might reach out longer.

Our lab test under "field" conditions

We used 100km of standard G.652 fiber and a . Our receive level was at -17,5 dBm and 10.3 Gbit/s (10G Ethernet). We did a BERT (bit-error-rate-test) with a Standard 2^31-1 PRBS and reached a BER of 10^-12. Reducing the light level lead to bit-errors.

Conclusion

A Bit-Error-Rate of BER 10^-12 means 1 bit-error every 100 seconds. If the input power value is high enough you might reach the 100km. If the input power values will be lower there are just up to 88km possible. --> Calculated max. receiver sensitivity (dispersion penalty included): -21 dBm
 

Related Products

Only registered users can post comments. Please Sign in or create an account