100G QSFP28 DACPassive Copper Cable, 0.5 - 5 m

QSFP28 to QSFP28 DAC passive
Q.Czz1HG.z
QSFP28
DAC
  • Universal Direct Attached Cable (DAC), 0.5 - 5 m
  • Use FLEXBOX to configure to almost any vendor
  • QSFP28 to QSFP28
  • Supports Datarates from 10.3 to 111.8 Gbit/s
  • Modules are permanently attached to each end
  • Low power consumption < 0.06 W (less than 0.03 W per terminal)
  • Connect different host systems by configuring each side individually
Specs
Twinax 0.5 m - 5 m 111.8 G
Protocols
100G ETH 40G ETH OTU4

* Required Fields

Part number
Q.Czz1HG.z
Availability
4-6 weeks after ordering
List price
138.85 EUR
Your price
from 124.97 EUR
Excl. 16% Tax
You can create a quote from your cart.
Just click CREATE QUOTE.

Specification

  • Form factor
    QSFP28
  • Type
    DAC
  • Interface
    Direct Attached Cable
  • Cable Type
    passive Twinax
  • Temperature range
    0°C - 70°C
  • Bandwidth
    41.2 Gbit/s - 111.8 Gbit/s
  • Digital Diagnostic Management (DDM)
    not implemented
  • Power Consumption
    0.06 W (0.03 W + 0.03 W)
  • CDR
    none
  • Protocols
    100G Ethernet, 40G Ethernet, OTU4

TRANSCEIVER CONFIGURATION WITH FLEXBOX IT'S THAT EASY TO USE

1 Insert into Flexbox

  • Download and start our FLEXOPTIX App
  • Connect your FLEXBOX using the supplied USB cable
  • Insert a Universal Transceiver

2 Select and configure

  • Simply choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds

3 Use with device

  • Use the transceiver in your device. That's it!
  • Need it for another device? - Just re-configure it again and again

Related know how

  • Use our 100G DAC for 40G...

    ... and Upgrade your Network seamless to 100G

    Some environments are currently running on 40G. Adding more 40G connections while upgrading to 100G, often results in double investments which are unnecessary with FLEXOPTIX DAC.

    You can use our 100G DAC Q.Czz1HG.z for 40G connections as well as 100G connections; just program them to 40G as interim solution. You can easily reconfigure the DAC to 100G later on and move on using the same hardware without the need to recycle or throw away anything. Saves money and reduces electronic scrap.

    If there is a compatibility missing just let us know and we can create within short time.

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

Your vendor / compatibility
is missing?

What Customers say

  • "Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!"
    Thomas Verschuren
    Technical Consultant, IP Visie Networking B.V.
  • "Your FLEXBOX rocks. On our Linux workstations we can easily change the vendor and thus save costs. In addition, we are also convinced by the product quality, the support and the handling of the order. Thank you!"
    Martin Verges
    Managing director, croit GmbH
  • "Now that I’m done configuring my equipment, I use FLEXBOX to impress associates. I’m an IT Hero just for the savings, not to mention the FLEXibility to stock one type for each adapter. Keep up the good work!"
    Nikos Papandreou
    Dipl. Civil Engineer acting as IT Admin/SQL Dev, Geitonas School SA
More