100G QSFP28 AOC with CDR (TX / RX) Multimode Fiber, 1 - 100 m

Universal Active Optical Cable (AOC) with CDR (TX / RX), 1 - 100 m
Use FLEXBOX to configure to almost any vendor
QSFP28 to QSFP28
distances up to 3m can come with OM2+
Supported Datarate 103.12 Gbit/s
Modules are permanently attached to each end
Low power consumption < 7 W (less than 3.5 W per terminal)
Easy cable routing thanks to small diameter (Ø 2 mm) and bend radius
Connect different host systems by configuring each side individually
Specs
  • Fiber
  • 1m - 100m
  • 103.12 G
  • Active
Protocols
  • 100G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
Q.A851HG.z

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

2x
100G QSFP28 SR4 with dual CDR 100 m, 4x λ850 nm, MTP/MPO-8/12, Multimode 
100G QSFP28 SR4 with dual CDR | 100 m, 4x λ850 nm, MTP/MPO-8/12, Multimode
3770 pcs in stock As low as 81.37 EUR
+
MTP® to MTP® Multimode OM3 cable 8 Cores, MPO compliant, 50/125 µm, aqua, 0.5 m - 100 m 
MTP&reg; to MTP&reg; Multimode OM3 cable | 8 Cores, MPO compliant, 50/125 &#181;m, aqua, 0.5 m - 100 m
As low as 97.88 EUR

Specification

Compliance Code AOC
Form Factor QSFP28 to QSFP28
Interface Active Optical Cable
Length 100 m
Temperature Range 0°C - 70°C
Bandwidth 103.12 Gbit/s
Digital Diagnostic Management (DDM) implemented
Power Consumption 7 W (3.5 W + 3.5 W)
CDR TX and RX
Modulation NRZ
Supported Protocols 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Edge Core ET7402-100AOC-100M compatible
  • Extreme 10437 compatible
  • Juniper JNP-100G-AOC-100M compatible
  • Nokia (ex. Alcatel-Lucent) 3HE10551AA compatible
  • Palo Alto Networks PAN-QSFP28-AOC-100M compatible
Your vendor / compatibility is missing?

What customers say

FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt Head of Platforms & Services, grandcentrix GmbH
Extensive list of supported vendors. Your product is like a Swiss Army Knife that all Engineers should have!! Great Job and keep it up!
Fahad Dalwai Network Engineer, Abdulaziz Abdulmohsin Al-Rashed Sons Co. W.L.L.

We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!

Matthias Götz Managing Director / Blue Taurus GmbH & Co. KG
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz Head of Network, STRATO AG
More