10G XFP, 100 GHz Grid - C-Band DWDM ER with dual CDR 40 km / 14 dB, LC-Duplex
- DWDM 100 GHz
- 40 km
- 11.1 G
- Dual CDR
- 10G ETH
- 10G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | XFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | DWDM |
Type | DWDM ER |
Distance | 40 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 9.95 Gbit/s - 11.1 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 3.5 W |
---|---|
CDR | TX and RX |
Inbuilt FEC | No |
Powerbudget (dB) | 14 dB |
Transmit min/max per lane | -1 dBm / 4 dBm |
Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) |
Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
Wavelength RX (Range) | 1270 - 1620 nm |
Laser | EML |
---|---|
Receiver Type | PIN |
Modulation | NRZ |
Transmit and Dispersion Penalty | 2 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | 10G Ethernet, 10G FC, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442987G8 compatible
- ADVA 1061701401-05 compatible
- ADVA 1061702201 compatible
- Alcatel-Lucent Ent. DWDM-40KM-C61 compatible
- Brocade / Ruckus 10G-XFP-ER compatible
- Ciena (ex. Nortel) NTK587EAE6 compatible
- Cisco Systems XFP-10GER compatible
- Dell (ex. Force10) GP-XFP-W61 compatible
- Extreme 10261 compatible
- Huawei DWDM-XFP10G-1528-77 compatible
- Huawei HXFP8441-610 compatible
- Infinera (ex. Transmode) TRX100031/961 compatible
- Juniper (ex BTI Systems) BP3AM4DL compatible
- Juniper XFP-10GE-ER compatible
- MRV XFP-DWLR08-61 compatible
- Net Insight NPA0059-1961 compatible
- Nokia (ex. Alcatel-Lucent) XFP-10G-DWDM-61 compatible
- Nokia Siemens Networks V50017-U776-K500 compatible
- Nortel / Juniper / NSN XFP-DWDM-14dB-C61 compatible
- Packetlight UL100S-CH61 compatible
- RAD XFP-5D-61 compatible
- Ribbon (ex. ECI) OTR10_AS compatible
What customers say
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.