10G XFP CWDM LR with dual CDR~10 km / 10 dB, 1270 nm - 1610 nm, LC

10G XFP CWDM LR with dual CDR | ~10 km / 10 dB, 1270 nm - 1610 nm, LC
X.1696.10.x
XFP
CWDM LR
  • Universal XFP Transceiver - CWDM
  • Use FLEXBOX to configure to almost any vendor
  • CWDM for multiple applications over one duplex fiber
  • For 10GBASE-LR Ethernet links
  • Supported Data Rates: 8.5 Gbit/s - 11.1 Gbit/s with dual CDR
  • Powerbudget of 10 dB for up to 10 km using an OS2 ITU-T G.652 fiber
Specs
CWDM ~10 km / 10 dB 11.1 G Dual CDR
Protocols
10G ETH 10G FC 8G FC OTU2 STM-64

* Required Fields

Part number
X.1696.10.x
Availability
4-6 weeks after ordering
List price
192.28 EUR
Your price
from 173.05 EUR
Excl. 19% Tax
You can create a quote from your cart.
Just click CREATE QUOTE.

Specification

  • Form factor
    XFP
  • Connector / Polish
    LC Duplex / PC
  • Interface
    CWDM
  • Type
    CWDM LR
  • Distance
    10 km
  • Temperature range
    -5°C - 70°C
  • Bandwidth
    8.5 Gbit/s - 11.1 Gbit/s
  • Digital Diagnostic Management (DDM)
    Internally Calibrated
  • Power Consumption
    3.5 W
  • CDR
    TX and RX
  • Inbuilt FEC
    No
  • Powerbudget (dB)
    10 dB
  • Transmit min/max
    -5 dBm / 0 dBm
  • Receiver min/max
    -15 dBm / 0.5 dBm (overload)
  • Laser
    DFB
  • Receiver Type
    PIN
  • Transmit and Dispersion Penalty
    2 dB
  • Extinction Ratio
    3.5 dB
  • Protocols
    10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64

TRANSCEIVER CONFIGURATION WITH FLEXBOX IT'S THAT EASY TO USE

1 Insert into Flexbox

  • Download and start our FLEXOPTIX App
  • Connect your FLEXBOX using the supplied USB cable
  • Insert a Universal Transceiver

2 Select and configure

  • Simply choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds

3 Use with device

  • Use the transceiver in your device. That's it!
  • Need it for another device? - Just re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

Your vendor / compatibility
is missing?

What Customers say

  • "Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!"
    Thomas Verschuren
    Technical Consultant, IP Visie Networking B.V.
  • "The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!"
    Klaus Degner
    Managing Director, Allegro Packets GmbH
  • "The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage."
    Shaun James
    Engineering Inspector, Tata Steel Strip Products UK
More