1G SFP CWDM ZX+ ~120 km / 36 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~120 km / 36 dB
- 1.25 G
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Type | CWDM ZX+ |
Distance | 120 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 1.05 Gbit/s - 1.25 Gbit/s |
Digital Diagnostic Management (DDM) | Internally Calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 36 dB |
Transmit min/max per lane | 0 dBm / 5 dBm |
Receiver min/max per lane | -36 dBm / -10 dBm (overload) |
Wavelength TX (Typical) | Channel R - 1610 nm |
Wavelength RX (Range) | 1260 - 1620 nm |
Laser | DFB |
---|---|
Receiver Type | APD |
Modulation | NRZ |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Accedian Networks 7SX-122 compatible
- ADTRAN 1442351G8 compatible
- Alcatel-Lucent Ent. CWDM-SFP-1610 compatible
- Allied Telesis AT-SPZX80 compatible
- Aruba Networks(ex. HP Network) J4860C compatible
- Avaya (ex. Nortel) AA1419068-E6 compatible
- Brocade / Ruckus E1MG-CWDM80-1610 compatible
- Ciena (ex. Nortel) NTK591TH compatible
- Ciena XCVR-100D61 compatible
- Cisco Systems CWDM-SFP-1610 compatible
- D-LINK DEM-314GT compatible
- Dell (ex. Force10) GP-SFP2-1Z compatible
- Dell 320-2879 compatible
- Extreme 10053 compatible
- FibroLAN SF1G-LX4C-61 compatible
- H3C (ex. 3COM) SF1G-LX4C-27 compatible
- Hirschmann M-SFP-LH/LC compatible
- Huawei SFP-GE-LH70-SM1610W compatible
- Infinera (ex. Transmode) TRX100015/61 compatible
- Juniper SFP-1GE-LH compatible
- Motorola 525893-001-00 compatible
- MRV SFP-GDCWEZX-61 compatible
- Netgear AGM733 compatible
- Nokia (ex. Alcatel-Lucent) 3FE29555AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE00070BH compatible
- Nortel / Juniper / NSN SFP-CWDM-34dB-1610 compatible
- Packetlight UL-CWDM-1G-HP-CH1610 compatible
- RAD SFP-61DH compatible
- Transition Networks TN-SFP-LX8-C61 compatible
- Waystream (ex. Packetfront) SFP-1000CWDM-61 compatible
- Zyxel SFP-LHX1310-40 compatible
What customers say
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.