2x 1G CSFP BiDi LX 20 km, 2x ᵀˣ1310 / 2x ᴿˣ1490 nm, DDM, LC-Simplex, Singlemode
- int. Mux
- 20 km
- 2x 1.25 G
- Dual BiDi
- 100M ETH
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | CSFP |
---|---|
Connector / Polish | 2x LC-Simplex UPC |
Interface | Singlemode BiDi |
Compliance Code | 2x BiDi LX |
Distance | 20 km |
Temperature Range | 0°C - 70°C |
Lane Count | 2x (Tx/Rx) |
Bandwidth | 2x 125 Mbit/s - 2x 1.25 Gbit/s |
Bandwith Per Lane | 125 Mbit/s - 1.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 2 W |
CDR | none |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 14 dB |
Transmit min/max per lane | -8 dBm / -3 dBm |
Receiver min/max per lane | -22 dBm / -3 dBm (overload) @1G |
Wavelength TX (Typical) | 2x 1310 nm |
Wavelength TX (Range) | 1260 - 1360 nm |
---|---|
Wavelength RX (Typical) | 2x 1490 nm |
Laser | FP |
Receiver Type | PIN |
Modulation | NRZ @1G |
Extinction Ratio | 82 dB |
Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems GLC-2BX-D compatible
- Keymile 37973282 compatible
- Nokia (ex. Alcatel-Lucent) 3FE65106AA01 compatible
- Nokia (ex. Alcatel-Lucent) 3HE08313AA compatible
- Telco Systems BTI-SFP-GBDC20L-DD-31/55S compatible
What customers say
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.