1G SFP BiDi ZX+ 120 km, ᵀˣ1490 / ᴿˣ1590 nm, DDM, LC-Simplex, Singlemode
- 1490 nm
- 120 km
- 1.25 G
- BiDi
- 100M ETH
- 1G ETH
- 1G FC
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Singlemode BiDi |
Compliance Code | BiDi ZX+ |
Distance | 120 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 125 Mbit/s - 1.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1 W |
CDR | none |
---|---|
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 33 dB |
Transmit min/max per lane | 0 dBm / 5 dBm |
Receiver min/max per lane | -33 dBm / -8 dBm (overload) @1G |
Wavelength TX (Typical) | 1490 nm |
Wavelength TX (Range) | 1483.5 - 1497 nm |
Wavelength RX (Typical) | 1590 nm |
Wavelength RX (Range) | 1570 - 1610 nm |
---|---|
Laser | DFB |
Receiver Type | APD |
Modulation | NRZ @1G |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 9 dB |
Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems GLC-BX80-U-I compatible
- Extreme 10053H compatible
- Ribbon (ex. ECI) OTGBE_L5BD80 compatible
What customers say
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!