2.67G SFP STM-16 BiDi Industrial 15 km, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Singlemode
SFP
BiDi STM-16
Universal SONET / SDH SFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
Capable of operating in SDH / SONET networks
Supported Data Rates: 125 Mbit/s - 2.67 Gbit/s
Up to 15 km via Singlemode OS2
LC-Simplex Connector
Operating Temperature from -40°C to 85°C, Digital Diagnocstic Monitoring (DDM)
Specs
- 1550 nm
- 15 km
- 2.67 G
- Industrial
Protocols
- 100M ETH
- 1G ETH
- 1G FC
- 2G FC
- STM-1
- STM-16
- STM-4
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi STM-16 |
| Distance | 15 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 125 Mbit/s - 2.67 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 10 dB |
| Transmit min/max per lane | -5 dBm / 0 dBm |
| Receiver min/max per lane | -15 dBm / -3 dBm (overload) @2G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1530 - 1570 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1360 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @2G |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Hirschmann M-SFP-LX/LC compatible
Your vendor / compatibility is missing?
What customers say
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede
CEO, EC-Hosting
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
David Schoefberger
Schoefberger
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren
Technical Consultant, IP Visie Networking B.V.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
Stefan Lieven
Teamleitung EDV / Pflegeheime Esslingen