1G SFP BiDi LX 20 km, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Singlemode
- 1550 nm
- 20 km
- 1.25 G
- BiDi
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LX |
| Distance | 20 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 1.05 Gbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 14 dB |
| Transmit min/max per lane | -8 dBm / -3 dBm |
| Receiver min/max per lane | -22 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1520 - 1580 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1360 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442120G1 compatible
- ADVA 0061003013 compatible
- Allied Telesis AT-SPBD20-14 compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) J4859C compatible
- barox AC-SFP-BIB-LXE compatible
- Bintec SFP-LC-TX/LX/LH compatible
- Blackbox LFP420 compatible
- Brocade / Ruckus E1MG-BXD compatible
- Brocade E1MG-LX-OM compatible
- Cisco Systems GLC-BX-D compatible
- ComNet SFP-12B compatible
- Coriant (ex. Tellabs) 81.S1GBEBX1153S compatible
- Coriant (ex. Tellabs) 82.S1GBEBX1153S compatible
- CTC Union ISFP-S7020-WB-D compatible
- Dell 407-10588 compatible
- Dell 407-BB00 compatible
- Dell 407-BBOO compatible
- DrayTek SFP.0BL.621.202 compatible
- Edge Core ET4203-BX20D compatible
- Extreme 10056 compatible
- FiberPlex SFP-SC24BD-5531-B compatible
- FibroLAN SF1G-SF15 compatible
- Fortinet FG-TRAN-LX compatible
- HP H3C JD119B compatible
- Huawei SFP-GE-LX-SM1550-BIDI compatible
- Intel SFP LX compatible
- Juniper SFP-GE20KT15R13 compatible
- Korenix SFPGLX20B15D compatible
- LANCOM SFP-LX-LC1 compatible
- LevelOne SFP-9331 compatible
- Marconi SU57AE compatible
- MikroTik S-53LC20D compatible
- Moxa SFP-1G20BLC compatible
- Netgear AGM732F compatible
- Nokia (ex. Alcatel-Lucent) 1AB393080006 compatible
- Nokia (ex. Alcatel-Lucent) 3FE25772AB compatible
- Nokia (ex. Alcatel-Lucent) SFP-GIG-BX-D compatible
- Nokia Siemens Networks V50017-U412-K500 compatible
- Nokia-Siemens (ex. Atrica) AT10077-0D-R compatible
- Planet MGB-LB20 compatible
- RAD SFP-17BD compatible
- Raisecom USFP-GB/SS532-DL compatible
- Siemens 6GK6000-8FB52-0AA0 compatible
- Transition Networks TN-SFP-LXB22 compatible
- TRENDnet TEG-MGBS10D5 compatible
- Ubiquiti Networks UF-SM-1G-S YE compatible
- Waystream (ex. Packetfront) SFP-1000BASE-BX20-D1550LC compatible
- Westermo 1100-0559 compatible
- Zyxel SFP-BX1550-20-D compatible
What customers say
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.
I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.
One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.
Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.
This is simply a brilliant idea and product! Thank you!