100M SFP BiDi LX SGMII 20 km, ᵀˣ1310 / ᴿˣ1550 nm, LC-Simplex, Singlemode

Universal SFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 100M - 800MBASE-LX Ethernet links
Leverage SMGII to support Fast Ethernet on 1 Gigabit devices
Supported Data Rates: 125 Mbit/s
Up to 20 km via Singlemode OS2
LC-Simplex Connector
Specs
  • 1310 nm
  • 20 km
  • 125 M
  • BiDi
Protocols
  • 100M ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.B1303.20.LG:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Matching Products

LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
30 pcs in stock 94.05 EUR

Specification

Form Factor SFP
Connector / Polish LC-Simplex UPC
Interface Singlemode BiDi
Compliance Code BiDi LX SGMII
Distance 20 km
Temperature Range 0°C - 70°C
Bandwidth 125 Mbit/s
Digital Diagnostic Management (DDM) Yes, none
Power Consumption 1 W
CDR none
SGMII Yes
Inbuilt FEC No
Powerbudget (dB) 17 dB
Transmit min/max per lane -15 dBm / -8 dBm
Receiver min/max per lane -32 dBm / -8 dBm (overload) @100M - 800M
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1260 - 1360 nm
Wavelength RX (Typical) 1550 nm
Wavelength RX (Range) 1480 - 1600 nm
Laser FP
Receiver Type PIN
Modulation NRZ @100M - 800M
Extinction Ratio 9 dB
Supported Protocols Fast Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling. The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Dominik Grueber Hetzner Online GmbH / Network Administrations

What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.

Pavel Sagulenko Head of IT Infrastructure / appliedAI Initiative GmbH
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt Head of Platforms & Services, grandcentrix GmbH
More