4G Fibre Channel SFP 10 km, λ1310 nm, DDM, LC-Duplex, Singlemode
- 1310 nm
- 10 km
- 4.25 G
- 1G ETH
- 1G FC
- 2G FC
- 4G FC
- STM-16
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Type | 4G FC LW |
Distance | 10 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 1.05 Gbit/s - 4.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 10 dB |
Transmit min/max per lane | -8 dBm / -3 dBm |
Receiver min/max per lane | -18 dBm / -3 dBm (overload) |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1260 - 1360 nm |
---|---|
Wavelength RX (Typical) | 1310 nm |
Wavelength RX (Range) | 1260 - 1620 nm |
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ |
Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, Gigabit Ethernet, STM-16 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 0061703805 compatible
- Brocade 57-1000015-01 compatible
- Cisco Systems DS-SFP-FC4G-LW compatible
- Cyan 280-0288-00 compatible
- HP Storage (B-Series) AE493A compatible
- IBM Storage 45W0494 compatible
- MRV SFPFC401 compatible
- NetApp X1504A-R6 compatible
- Packetlight SL9 compatible
- Perle PSFP-4GD-S2LC10 compatible
- QLogic SFP4-LW-1PK compatible
- Ribbon (ex. ECI) OTFC4_S3 compatible
- Riedel 1990005 compatible
- Transition Networks TN-SFP-FC4XS1 compatible
What customers say
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!