2.67G SFP STM-16 40 km, λ1310 nm, DDM, LC-Duplex, Singlemode

Universal SONET / SDH SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Capable of operating in SDH / SONET networks
Supported Data Rates: 100 Mbit/s - 2.67 Gbit/s
Up to 40 km via Singlemode OS2
LC-Duplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
  • 1310 nm
  • 40 km
  • 2.67 G
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
  • 2G FC
  • STM-1
  • STM-16
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.1326.40.D:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Power Budget
2.67G SFP STM-16 15 km, λ1310 nm, DDM, LC-Duplex, Singlemode 
2.67G SFP STM-16 | 15 km, λ1310 nm, DDM, LC-Duplex, Singlemode
122 pcs in stock As low as 72.42 EUR
Higher Temperature Range
2.67G SFP STM-16 Industrial 40 km, λ1310 nm, DDM, LC-Duplex, Singlemode 
2.67G SFP STM-16 Industrial | 40 km, λ1310 nm, DDM, LC-Duplex, Singlemode
0 pcs in stock As low as 138.25 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
31 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code STM-16
Distance 40 km
Temperature Range 0°C - 70°C
Bandwidth 100 Mbit/s - 2.67 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 25 dB
Transmit min/max per lane -2 dBm / 3 dBm
Receiver min/max per lane -27 dBm / -9 dBm (overload) @2G
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1260 - 1360 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1260 - 1600 nm
Laser DFB
Receiver Type APD
Modulation NRZ @2G
Extinction Ratio 8.2 dB
Supported Protocols 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Actelis 506R51750 compatible
  • ADTRAN 1184560P1 compatible
  • ADVA 0061705807 compatible
  • Allied Telesis AT-SPLX40 compatible
  • Barnfind BTSFP-LX-SM-0340 compatible
  • Brocade / Ruckus E1MG-100FX-LR-OM compatible
  • Brocade / Ruckus E1MG-LH-OM compatible
  • Ciena NTTP03EF compatible
  • Cisco Systems GLC-EX-SMD compatible
  • Cisco Systems ONS-SI-155-L1 compatible
  • Cisco Systems ONS-SI-2G-L1 compatible
  • Cisco Systems ONS-SI-622-L1 compatible
  • Coriant (ex. Tellabs) TR-0008 compatible
  • FiberPlex SFP-SC48XC-3131-C compatible
  • GE (General Electric) STM-16.LR compatible
  • Huawei eSFP-1310nm-L-16.1 compatible
  • Infinera (ex. Transmode) TRX100086 compatible
  • Juniper SFP-1GE-LH compatible
  • Keymile 37973223 compatible
  • Marconi SU68AC compatible
  • MRV SFP-MR27D-LR1-R compatible
  • Net Insight NPA0022-LL11 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB194670005 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB196360006 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB196370008 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB376370003 compatible
  • Nokia (ex. Alcatel-Lucent) 3FE25775AA compatible
  • Nokia (ex. Alcatel-Lucent) OM2G5-L16.1 compatible
  • Nokia Siemens Networks V50017-U341-K500 compatible
  • Nokia Siemens Networks V50017-U5441-K500 compatible
  • Packetlight SL8 compatible
  • Ribbon (ex. ECI) OTR16_L3 compatible
  • Viavi (ex. JDSU) CSFP-2G5-3-1 compatible
Your vendor / compatibility is missing?

What customers say

I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.

Denis Kempeneers Network Consultant-globalnetwork.tech
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen Infrastructure Engineer, Previder B.V
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.

FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device.  The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX .  Absolutely brilliant and couldn't ask for more.

Stuart Willson Infrastructure Engineer/ Surrey Satellite Technology Limited
More