1G SFP EX Industrial 40 km, λ1310 nm, DDM, LC-Duplex, Singlemode
- 1310 nm
- 40 km
- 1.25 G
- Industrial
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | EX |
| Distance | 40 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 1 Gbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 22 dB |
| Transmit min/max per lane | -2 dBm / 3 dBm |
| Receiver min/max per lane | -24 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1260 - 1360 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442340G1 compatible
- ADVA 1061705851-02 compatible
- Alcatel-Lucent Ent. ISFP-GIG-LX compatible
- Aruba Networks(ex. HP Network) J4859C compatible
- barox AC-SFP-LX-E-40 compatible
- Brocade / Ruckus E1MG-LH-OM compatible
- Brocade E1MG-LH-OM compatible
- Calix 100-01663 compatible
- Ceragon SFP-GE-LX compatible
- Ciena XCVR-040Y31 compatible
- Cisco Systems GLC-EX-SMD compatible
- CTC Union ISFP-S7040-31-DE compatible
- Cyan 280-0030-00-40 compatible
- Huawei eSFP-1310nm-Lx-40Km compatible
- Huawei S-SFP-GE-LH40-SM1310 compatible
- Juniper EX-SFP-1GE-LX40K compatible
- Keymile 37973037 compatible
- Korenix SFPGLHX30D-w compatible
- LevelOne SFP-4240 compatible
- Moxa SFP-1GLHXLC-T compatible
- Nokia (ex. Alcatel-Lucent) 3FE25775AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE00867CA compatible
- Packetlight SL6 compatible
- Perle PSFP-1000D-S2LC40-XT compatible
- Planet MGB-TL30 compatible
- RAD SFP-8DH compatible
- Redlion NTSFP-LX-40 compatible
- Ribbon (ex. ECI) OTGBE-EX compatible
- Sophos ITFZTCHLX compatible
- Ubiquiti Networks UF-SM-1G-S compatible
- Westermo GSLC30-LHX compatible
What customers say
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.