4G Fibre Channel SFP CWDM ~80 km / 26 dB, 1270 nm - 1610 nm, DDM, LC-Duplex

Universal Fibre Channel SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
Fibre Channel (FC) support for storage area network (SAN) interconnect
Supported Data Rates: 1.05 Gbit/s - 4.25 Gbit/s
Powerbudget of 26 dB for up to 80 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
  • CWDM
  • ~80 km / 26 dB
  • 4.25 G
Protocols
  • 1G ETH
  • 1G FC
  • 2G FC
  • 4G FC
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.1648.26.xD

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface CWDM
Compliance Code 4G FC LW
Distance 80 km
Temperature Range 0°C - 70°C
Bandwidth 1.05 Gbit/s - 4.25 Gbit/s
Digital Diagnostic Management (DDM) Externally Calibrated
Power Consumption 1 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 26 dB
Transmit min/max per lane 2 dBm / 7 dBm
Receiver min/max per lane -24 dBm / -9 dBm (overload) @4G
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type APD
Modulation NRZ @4G
Supported Protocols 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, Gigabit Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 0061702498 compatible
  • ADVA 0061702498-03 compatible
  • Brocade XBR-000146 compatible
  • Cisco Systems DS-CWDM4G1610 compatible
  • HP Storage (B-Series) AN211A compatible
  • Infinera (ex. Transmode) TRX100052/61 compatible
  • Infinera (ex. Transmode) TRX100057/61 compatible
  • Juniper (ex BTI Systems) BP3AM2CL compatible
  • MRV SFPFC4CW08-61 compatible
  • Packetlight UL-CWDM-4G-FC-L-CH1610 compatible
Your vendor / compatibility is missing?

What customers say

After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri CTO, SGN d.o.o.

FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.

Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models

now I can operate and adapt to each on site production.

Emilio Vargas Production Manager / Liga ACE esports
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
Gregory Agerba CTO, Neocarrier Communications

The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.

Looking forward to keep using the flexbox in the future! :)

Stan van de Klippe Chief Executive Officer-royalehosting.net
More