2.67G STM-16 SFP, 100 GHz Grid - C-Band DWDM 120 km / 33 dB, DDM, LC-Duplex
- DWDM 100 GHz
- 120 km
- 2.67 G
- 100M ETH
- 1G ETH
- 1G FC
- 2G FC
- CPRI
- STM-1
- STM-16
- STM-4
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | DWDM |
Compliance Code | STM-16 |
Distance | 120 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 125 Mbit/s - 2.67 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1.5 W |
---|---|
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 33 dB |
Transmit min/max per lane | 2 dBm / 5 dBm |
Receiver min/max per lane | -31 dBm / -9 dBm (overload) @2G |
Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
Wavelength RX (Range) | 1260 - 1620 nm |
Laser | DFB |
---|---|
Receiver Type | APD |
Modulation | NRZ @2G |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, LTE 2.458G CPRI, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442707G40 compatible
- ADVA 0061000901 compatible
- ADVA 0061704501-03 compatible
- Cisco Systems SFP-GE-Z compatible
- Huawei eSFP-LH120-SM196.00 compatible
- Infinera (ex. Transmode) TRX100028/961 compatible
- Juniper (ex BTI Systems) BP3AM1DX compatible
- Juniper SFP-1GE-LH compatible
- MRV SFP27DWLR12-61R compatible
- Net Insight NPA0058-1961 compatible
What customers say
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.