2.67G STM-16 SFP, 100 GHz Grid - C-Band DWDM 100 km / 29 dB, DDM, LC-Duplex

Universal SDH SFP Transceiver - 100 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
Capable of operating in SDH / SONET networks
Supported Data Rates: 125 Mbit/s - 2.67 Gbit/s
Powerbudget of 29 dB for up to 100 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
  • DWDM 100 GHz
  • 100 km
  • 2.67 G
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
  • 2G FC
  • CPRI
  • STM-1
  • STM-16
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.1626.29.yyD

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Matching Products

LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface DWDM
Compliance Code STM-16
Distance 100 km
Temperature Range 0°C - 70°C
Bandwidth 125 Mbit/s - 2.67 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1.5 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 29 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -29 dBm / -9 dBm (overload) @2G
Wavelength TX (Typical) Channel 61 - 1528.77 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type APD
Modulation NRZ @2G
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, LTE 2.458G CPRI, STM-1, STM-16, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 0061000201 compatible
  • Arris 780180 compatible
  • Brocade / Ruckus E1MG-DWDM80-C61 compatible
  • Ciena (ex. Nortel) NTK586AAE5 compatible
  • Cisco Systems DWDM-SFP-2877 compatible
  • Cisco Systems GLC-FE-100ZX compatible
  • Cisco Systems ONS-SC-2G-28.7 compatible
  • Cisco Systems SFP-GE-Z compatible
  • Huawei eSFP-LH120-SM196.10 compatible
  • Infinera (ex. Transmode) TRX100028/961 compatible
  • Juniper (ex BTI Systems) BP3AM1DE compatible
  • Juniper SFP-1GE-LH compatible
  • Marconi SU68EN compatible
  • MRV SFP27DWLR08-61R compatible
  • Net Insight NPA0058-1961 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB231410002 compatible
  • Nokia Siemens Networks V50017-U3001-K500 compatible
Your vendor / compatibility is missing?

What customers say

Your FLEXBOX rocks. On our Linux workstations we can easily change the vendor and thus save costs. In addition, we are also convinced by the product quality, the support and the handling of the order. Thank you!
Martin Verges Managing director, croit GmbH
Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver
Mike Dallaway Mira 2014 Limited

We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!

Matthias Götz Managing Director / Blue Taurus GmbH & Co. KG
When in possession of the Flexbox it becomes and indispensable tool in general, and also specifically in managing remote Mobile Base Stations fiber connectivity. Using the Flexbox either with PC or Smartphone is really plug and play with no annoying incompatibility issues at all. The Flexbox together with ease of order and superior delivery times makes it literally unnecessary for us having any significant SFP stock.
Terji Leitisstein Hansen RAN Manager, Vodafone FO
More