2.67G STM-16 SFP CWDM ~100 km / 29 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~100 km / 29 dB
- 2.67 G
- 100M ETH
- 1G ETH
- 1G FC
- 2G FC
- STM-1
- STM-16
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM STM-16 |
| Distance | 100 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 100 Mbit/s - 2.67 Gbit/s |
| Digital Diagnostic Management (DDM) | Externally Calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 29 dB |
| Transmit min/max per lane | 0 dBm / 5 dBm |
| Receiver min/max per lane | -29 dBm / -9 dBm (overload) @2G |
| Wavelength TX (Typical) | Channel R - 1610 nm |
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | DFB |
|---|---|
| Receiver Type | APD |
| Modulation | NRZ @2G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442706PG1 compatible
- ADVA 0061704698 compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) J4860C compatible
- Ciena (ex. Nortel) NTK590TH compatible
- Ciena XCVR-100D61 compatible
- Cisco Systems CWDM-SFP-1610 compatible
- Cisco Systems ONS-SC-Z3-1610 compatible
- Coriant (ex. Tellabs) 81.SOC48IR2AH1S compatible
- Ericsson RDH90120/81728 compatible
- FibroLAN SF2G-LX4-5C-61 compatible
- Huawei CWDM-SFPGE-1611 compatible
- Huawei eSFP-LH80-SM1611 compatible
- Infinera (ex. Transmode) TRX100015/61 compatible
- Infinera TOM-MR-C61-LR2 compatible
- Juniper (ex BTI Systems) BP3AM1CL compatible
- Juniper SFP-1GE-LH compatible
- Marconi SU68AD compatible
- Marconi SU68CU compatible
- Marconi SU68CU-OMS1200 compatible
- MRV SFP-27DCWLR-61R compatible
- Net Insight NPA0023-1610 compatible
- Nokia (ex. Alcatel-Lucent) 1AB196350033 compatible
- Nokia Siemens Networks V50017-U3161-K500 compatible
- Nokia Siemens Networks V50017-U3361-K500 compatible
- Ribbon (ex. ECI) OTR16_L5 compatible
- Ribbon (ex. ECI) OTR1_L5 compatible
- Ribbon (ex. ECI) OTR4_L5 compatible
What customers say
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.