1G SFP CWDM ZX Extended ~80 km / 24 dB, 1270 nm - 1610 nm, DDM, LC-Duplex

Universal SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
For 1000BASE-ZX Ethernet links
Supported Data Rates: 1.05 Gbit/s - 1.25 Gbit/s
Powerbudget of 24 dB for up to 80 km using an OS2 ITU-T G.652 fiber
Operating Temperature from -20°C to 85°C
Digital Diagnostic Monitoring (DDM)
Specs
  • CWDM
  • ~80 km / 24 dB
  • 1.25 G
  • Industrial
Protocols
  • 1G ETH
  • 1G FC
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.1612.25.xDI

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Power Budget
1G SFP CWDM EX Extended ~40 km / 19 dB, 1270 nm - 1610 nm, DDM, LC-Duplex 
1G SFP CWDM EX Extended | ~40 km / 19 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
As low as 79.00 EUR
Higher Power Budget
1G SFP CWDM ZX+ Extended ~120 km / 36 dB, 1270 nm - 1610 nm, DDM, LC-Duplex 
1G SFP CWDM ZX+ Extended | ~120 km / 36 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
As low as 151.42 EUR
Lower Temperature Range
1G SFP CWDM ZX ~80 km / 24 dB, 1270 nm - 1610 nm, DDM, LC-Duplex 
1G SFP CWDM ZX | ~80 km / 24 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
As low as 90.85 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface CWDM
Compliance Code CWDM ZX
Distance 80 km
Temperature Range -20°C - 85°C
Bandwidth 1.05 Gbit/s - 1.25 Gbit/s
Digital Diagnostic Management (DDM) Internally Calibrated
Power Consumption 1 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 24 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -24 dBm / -3 dBm (overload) @1G
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @1G
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols 1G Fibre Channel, Gigabit Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Brocade / Ruckus E1MG-CWDM80-1610 compatible
  • Brocade E1MG-LX-OM compatible
  • Calix 100-03792 compatible
  • Cisco Systems CWDM-SFP-1610 compatible
  • Nokia (ex. Alcatel-Lucent) 3FE25771AH compatible
  • Telco Systems BTI-CW-T-ZR-61-SFP compatible
Your vendor / compatibility is missing?

What customers say

Using FLEXBOX we have been able to deliver high quality optical adapter product range in a mixed brand environment, with the maximum flexibility in managing logistic and stock costs. It is a definitely a tool that every professional should use.
Laert Klemo CTO, Eagle Security System
Since we ordered a FLEXBOX, our life as definitly changed. There’s a before and an after FLEXBOX. So many vendors in the compatibility matrice, so easy way to configure the module! And the cables and accessories came also with quality.
Stéphane Gouron Directeur Agence Ouest, S-cube.
FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.
Otto Lodewijk Director, SuitIT

I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.

Poul Pedersen Network consultant / Ipwork consult ApS
More