STM-4 SFP CWDM ~140 km / 39 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~140 km / 39 dB
- 622 M
- 100M ETH
- STM-1
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM STM-4 |
| Distance | 140 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 100 Mbit/s - 622 Mbit/s |
| Digital Diagnostic Management (DDM) | Internally Calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 39 dB |
| Transmit min/max per lane | 2 dBm / 7 dBm |
| Receiver min/max per lane | -37 dBm / -10 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | Channel R - 1610 nm |
| Wavelength RX (Range) | 1100 - 1650 nm |
| Laser | DFB |
|---|---|
| Receiver Type | APD |
| Modulation | NRZ @100M - 800M |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | Fast Ethernet, STM-1, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Brocade / Ruckus E1MG-100FX-LR-OM compatible
- Ribbon (ex. ECI) OTR1_S3 compatible
- Ribbon (ex. ECI) OTR4_S3 compatible
What customers say
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.