STM-4 SFP CWDM ~80 km / 28 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~80 km / 28 dB
- 622 M
- 100M ETH
- STM-1
- STM-4
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM STM-4 |
| Distance | 80 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 100 Mbit/s - 622 Mbit/s |
| Digital Diagnostic Management (DDM) | Internally Calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 28 dB |
| Transmit min/max per lane | 0 dBm / 5 dBm |
| Receiver min/max per lane | -28 dBm / -8 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | Channel R - 1610 nm |
| Wavelength RX (Range) | 1100 - 1650 nm |
| Laser | DFB |
|---|---|
| Receiver Type | PIN |
| Modulation | NRZ @100M - 800M |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | Fast Ethernet, STM-1, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- ADTRAN 1442703PG8 compatible
- ADVA # compatible
- Allied Telesis # compatible
- Aruba Networks(ex. HP Network) # compatible
- Avaya (ex. Nortel) # compatible
- Brocade # compatible
- Brocade / Ruckus E1MG-100FX-LR-OM compatible
- Check Point # compatible
- Ciena (ex. Nortel) NTTP04CF compatible
- Ciena XCVR-080D61 compatible
- Cisco Systems # compatible
- D-LINK # compatible
- Dell # compatible
- Edge Core # compatible
- Ericsson RDH90120/61728 compatible
- Extreme # compatible
- Extreme (ex. Enterasys) # compatible
- F5 Networks # compatible
- FibroLAN # compatible
- Fluke Networks # compatible
- Force10 / Juniper # compatible
- Fortinet # compatible
- Fujitsu # compatible
- H3C (ex. 3COM) # compatible
- Hirschmann # compatible
- HP H3C # compatible
- Huawei # compatible
- Infinera (ex. Transmode) # compatible
- Intel # compatible
- Juniper # compatible
- Juniper (ex BTI Systems) # compatible
- Keymile # compatible
- KTI Networks # compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne # compatible
- Lynx # compatible
- Marconi SU67AC compatible
- MikroTik # compatible
- Motorola # compatible
- Moxa # compatible
- MRV # compatible
- Netgear # compatible
- Nokia (ex. Alcatel-Lucent) # compatible
- Nokia Siemens Networks V50017-U332-K500 compatible
- Palo Alto Networks # compatible
- Radware # compatible
- Ribbon (ex. ECI) # compatible
- TP-LINK # compatible
- Transition Networks TN-SFP-OC12S-C61 compatible
- Ubiquiti Networks # compatible
- Waystream (ex. Packetfront) # compatible
What customers say
I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.
One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.
Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.
This is simply a brilliant idea and product! Thank you!
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.