STM-4 SFP CWDM ~40 km / 23 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~40 km / 23 dB
- 622 M
- 100M ETH
- STM-1
- STM-4
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Compliance Code | CWDM STM-4 |
Distance | 40 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 100 Mbit/s - 622 Mbit/s |
Digital Diagnostic Management (DDM) | Internally Calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 23 dB |
Transmit min/max per lane | -5 dBm / 0 dBm |
Receiver min/max per lane | -28 dBm / -8 dBm (overload) @100M - 800M |
Wavelength TX (Typical) | Channel R - 1610 nm |
Wavelength RX (Range) | 1100 - 1650 nm |
Laser | DFB |
---|---|
Receiver Type | PIN |
Modulation | NRZ @100M - 800M |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | Fast Ethernet, STM-1, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442703PG9 compatible
- Ciena (ex. Nortel) NTTP04CF compatible
- Marconi SU67AB compatible
- Nokia (ex. Alcatel-Lucent) 1AB196360006 compatible
- OTN Systems V30813-S8-A1 compatible
What customers say
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.