100G QSFP28 BiDi CWDM4 with dual CDR 2 km, LC-Simplex APC, Singlemode
- int. Mux
- 2 km
- 103.12 G
- LC
- 100G ETH
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Simplex APC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi CWDM4 |
| Distance | 2 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 103.12 Gbit/s |
| Bandwith Per Lane | 25.78 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 3.5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 5 dB |
| Transmit min/max per lane | -6.5 dBm / 2.5 dBm |
| Receiver min/max per lane | -11.5 dBm / 2.5 dBm (overload) @100G |
| Wavelength TX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
| Wavelength RX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
|---|---|
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @100G |
| Transmit and Dispersion Penalty | 3 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party QSFP-100G-CWDM4 compatible
- Arista QSFP-100G-CWDM4 compatible
- Brocade 100G-QSFP28-CWDM4-2KM compatible
- Cisco Systems QSFP-100G-CWDM4-S compatible
- Extreme 10403 compatible
- Huawei QSFP-100G-CWDM4 compatible
- Infinera (ex. Coriant) ZXS-Q8L-4ZZZZ-00 compatible
- Nokia (ex. Alcatel-Lucent) 3AL82075AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE10552AA compatible
- Nvidia (ex. Mellanox) MMA1B00-C100D compatible
- Nvidia (ex. Mellanox) MMA1L30-CM compatible
What customers say
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
You guys rock! I have had the opportunity to use the previous version of FLEXBOX with my previous company. I cannot believe the progress you have made just in a year. Battery pack? Mobile reconfiguration? I am truly feeling lucky to have met you guys at Cloudfest. I will be honoured to demonstrate your products to startups as great examples to contribute to tech sustainability.
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!