100G QSFP28 BiDi LR Industrial with dual CDR 10 km, ᵀˣ1331 / ᴿˣ1271 nm, LC-Simplex, Singlemode
QSFP28
BiDi LR
Universal QSFP28 BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 100GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 106.25 Gbit/s
Up to 10 km via Singlemode OS2
LC-Simplex Connector
Operating Temperature from -40°C to 85°C
Specs
- 1331 nm
- 10 km
- 106.25 G
- LC
Protocols
- 100G ETH
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LR |
| Distance | 10 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 106.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 4.5 W |
| CDR | TX and RX |
|---|---|
| SGMII | No |
| Inbuilt FEC | Yes, KP4 |
| Powerbudget (dB) | 4.7 dB |
| Transmit min/max per lane | -1.4 dBm / 4.5 dBm |
| Receiver min/max per lane | -6.1 dBm / 4.5 dBm (overload) @100G |
| Wavelength TX (Typical) | 1331 nm |
| Wavelength TX (Range) | 1324.5 - 1337.5 nm |
| Wavelength RX (Typical) | 1271 nm |
| Wavelength RX (Range) | 1264.5 - 1277.5 nm |
|---|---|
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @100G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
Your vendor / compatibility is missing?
What customers say
I have received my orders from them in blistering speed. Happy to the nth degree.
Pat Cluney
Senior Technical Officer, Waterford Institute of Technology
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz
Head of Network, STRATO AG
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect
Aviatrix
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!
Julien BENNET
Technical Director / Areal