100G QSFP28 BiDi LR with dual CDR 10 km, ᵀˣ1331 / ᴿˣ1271 nm, LC-Simplex, Singlemode

Universal QSFP28 BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 100GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 106.25 Gbit/s
Up to 10 km via Singlemode OS2
LC-Simplex Connector
Specs
  • 1331 nm
  • 10 km
  • 106.25 G
  • LC
Protocols
  • 100G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
Q.B161HG.10.DA:Sx
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor QSFP28
Connector / Polish LC-Simplex UPC
Interface Singlemode BiDi
Type BiDi LR
Distance 10 km
Temperature Range 0°C - 70°C
Bandwidth 106.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 4.5 W
CDR TX and RX
SGMII No
Inbuilt FEC Yes
Powerbudget (dB) 4.7 dB
Transmit min/max per lane -1.4 dBm / 4.5 dBm
Receiver min/max per lane -6.1 dBm / 4.5 dBm (overload)
Wavelength TX (Typical) 1331 nm
Wavelength TX (Range) 1324.5 - 1337.5 nm
Wavelength RX (Typical) 1271 nm
Wavelength RX (Range) 1264.5 - 1277.5 nm
Laser EML
Receiver Type PIN
Modulation PAM4
Transmit and Dispersion Penalty 3.4 dB
Extinction Ratio 3.5 dB
Supported Protocols 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Arista 3rd_Party QSFP-100G-LR4 compatible
  • Cisco Systems QSFP-100G-LR4-S compatible
  • Dell QSFP28-100G-LR4 compatible
  • Fortinet FG-TRAN-QSFP28-LR4 compatible
  • Huawei 10km_BiDi_LR4 compatible
  • Juniper QSFP-100G-LR compatible
  • Nokia (ex. Alcatel-Lucent) 3HE10550AA compatible
Your vendor / compatibility is missing?

What customers say

Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.
Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver
Mike Dallaway Mira 2014 Limited
Just wanted to express my giddy happiness at how fast your crack team of ninjas were able to get optics to my desk.
Donal Cunningham Senior Network Engineer - Airspeed Telecom

The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.

Robert Niedermair IT Infrastructure Administrator, INTERCABLE AUTOMOTIVE SOLUTIONS S.r.l.
More