200G QSFP56 SR4 with dual CDR 100 m, 4x λ850 nm, MTP/MPO-8/12, Multimode
Universal QSFP56 Transceiver
Use FLEXBOX to configure to almost any vendor
For 200GBASE-SR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
With QSFP-MSA memory map
Supported Data Rates: 212.5 Gbit/s (4x 53.13 Gbit/s)
Up to 100 m via Multimode OM4
MTP/MPO-8/12 Connector
Specs
- 4x 850 nm
- 100 m
- 212.5 G
- MTP/MPO-8/12
Protocols
- 200G ETH
- 200G HDR
-
Matching Products
-
Matching Products
Specification
Form Factor | QSFP56 |
---|---|
Connector / Polish | MTP/MPO-8/12 PC |
Interface | Multimode |
Compliance Code | SR4 |
Distance | 100 m |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 212.5 Gbit/s |
Bandwith Per Lane | 53.13 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 1.9 dB |
Transmit min/max per lane | -6.5 dBm / 4 dBm |
Receiver min/max per lane | -8.4 dBm / 4 dBm (overload) @200G |
Wavelength TX (Typical) | 4x 850 nm |
Wavelength TX (Range) | 840 - 860 nm |
---|---|
Wavelength RX (Typical) | 4x 850 nm |
Laser | VCSEL |
Receiver Type | PIN |
Modulation | PAM4 @200G |
Transmit and Dispersion Penalty | 4.5 dB |
Extinction Ratio | 3 dB |
Supported Protocols | 200G Infiniband HDR, 200G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
Your vendor / compatibility is missing?
What customers say
For years we struggled with hundreds of transceivers from different vendors but this is finally over!
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle
Director Infrastructure Services, Avira Operations GmbH & Co.KG
The FLEXBOX is the best thing since sliced bread!
Stefan Ideler
CTO, i3D.net
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
Bronislav Robenek
Network Architect, Cloud4com
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
Michael Nicolaou
Senior Network Consultant, CDMA Services Ltd