100G QSFP28 LR with dual CDR 20 km, λ1311 nm, LC-Duplex, Singlemode

Universal QSFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 106.25 Gbit/s
Up to 20 km via Singlemode OS2
LC-Duplex Connector
Specs
  • 1311 nm
  • 20 km
  • 106.25 G
  • LC
Protocols
  • 100G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
Q.13S1HG.20:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Power Budget
100G QSFP28 ER with dual CDR 40 km, λ1310 nm, LC-Duplex, Singlemode 
100G QSFP28 ER with dual CDR | 40 km, λ1310 nm, LC-Duplex, Singlemode
0 pcs in stock 1,800.25 EUR
Lower Power Budget
100G QSFP28 LR with dual CDR 10 km, λ1311 nm, LC-Duplex, Singlemode 
100G QSFP28 LR with dual CDR | 10 km, λ1311 nm, LC-Duplex, Singlemode
1260 pcs in stock As low as 340.70 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor QSFP28
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code LR
Distance 20 km
Temperature Range 0°C - 70°C
Bandwidth 106.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 4.5 W
CDR TX and RX
SGMII No
Inbuilt FEC Yes, KP4
Powerbudget (dB) 9.8 dB
Transmit min/max per lane -0.2 dBm / 6.6 dBm
Receiver min/max per lane -10 dBm / 6.6 dBm (overload) @100G
Wavelength TX (Typical) 1311 nm
Wavelength TX (Range) 1304.5 - 1317.5 nm
Wavelength RX (Typical) 1311 nm
Wavelength RX (Range) 1304.5 - 1317.5 nm
Laser EML
Receiver Type PIN
Modulation PAM4 @100G
Transmit and Dispersion Penalty 3.6 dB
Extinction Ratio 3.5 dB
Supported Protocols 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Juniper JNP-QSFP-100G-LR4 compatible
  • Juniper QSFP-100G-LR compatible
Your vendor / compatibility is missing?

What customers say

We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!

Matthias Götz Managing Director / Blue Taurus GmbH & Co. KG
Extensive list of supported vendors. Your product is like a Swiss Army Knife that all Engineers should have!! Great Job and keep it up!
Fahad Dalwai Network Engineer, Abdulaziz Abdulmohsin Al-Rashed Sons Co. W.L.L.
The FLEXBOX is the best thing since sliced bread!
Stefan Ideler CTO, i3D.net
Working with the FLEXOPTIX Transceivers and FLEXBOX is not only uncomplicated but offers us the possibility of working with many vendor types to support the different campus networks. Thanks guys - awesome work.
Brian Masiga Network Engineer, Research and Education Network for Uganda
More