100G QSFP28 CWDM LR with dual CDR and FEC ~10 km / 4.7 dB, 1270 nm - 1330 nm, LC-Duplex
- CWDM
- ~10 km / 4.7 dB
- 106.25 G
- Dual CDR
- 100G ETH
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Matching Products
Specification
Form Factor | QSFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Type | CWDM LR |
Distance | 10 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Internally Calibrated |
Power Consumption | 4.5 W |
---|---|
CDR | TX and RX |
Inbuilt FEC | Yes |
Powerbudget (dB) | 4.7 dB |
Transmit min/max per lane | -1.4 dBm / 4.7 dBm |
Receiver min/max per lane | -6.1 dBm / 4.7 dBm (overload) |
Wavelength TX (Typical) | Channel D - 1330 nm |
Wavelength RX (Range) | 1260 - 1570 nm |
Laser | DFB |
---|---|
Receiver Type | PIN |
Modulation | PAM4 |
Transmit and Dispersion Penalty | 3.4 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party QSFP-100G-LR4 compatible
- Arista QSFP-100G-LR4 compatible
- Cisco Systems QSFP-100G-LR4-S compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.