40G QSFP+ LX4 150 m, λ1271-1331 nm, LC-Duplex, Single-/Multimode
- int. Mux
- 150 m
- 44.4 G
- LC
- 10G ETH
- 40G ETH
- OTU3
- OTU3e2
Specification
| Form Factor | QSFP+ |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Single-/Multimode |
| Compliance Code | LX4 |
| Distance | 150 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 41.2 Gbit/s - 44.4 Gbit/s |
| Bandwith Per Lane | 10.3 Gbit/s - 11.1 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 4.5 dB |
| Transmit min/max per lane | -7 dBm / 2.3 dBm |
| Receiver min/max per lane | -11.5 dBm / 2.3 dBm (overload) @40G |
|---|---|
| Wavelength TX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
| Wavelength RX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @40G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 40G Ethernet, 10G Ethernet, OTU3, OTU3e2 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks AXSK-QSFP-SR compatible
- Alcatel-Lucent Ent. QSFP-40G-SR compatible
- Arista 3rd_Party 40GBASE-LRL4 compatible
- Arista 40GBASE-LRL4 compatible
- Avaya (ex. Nortel) AA1404002-E6 compatible
- Brocade 40G-QSFP-LM4 compatible
- Chelsio # 13013 compatible
- Cisco Systems QSFP-40G-SR4 compatible
- Dell (ex. Force10) GP-QSFP-40GE-1LR compatible
- Dell 407-BBRC compatible
- Extreme (ex. Enterasys) # 13015 compatible
- Extreme 10334 compatible
- F5 Networks OPT-0025 compatible
- Fortinet FG-TRAN-QSFP+LR compatible
- Gigamon QSB-502A40G0900# compatible
- HP H3C JL251A compatible
- Huawei QSFP-40G-LX4 compatible
- IBM Storage 49Y7884 compatible
- Intel E40GQSFPSR compatible
- Juniper JNP-QSFP-40G-LX4 compatible
- MikroTik Q+85MP01D compatible
- MRV # 13021 compatible
- Netgear AXLM762 compatible
- NetOptics QSFP+KT-50SR4 compatible
- Nvidia (ex. Mellanox) MC2210411-SR4 compatible
- Packetlight QSFP+-SR-1102 compatible
- Palo Alto Networks PAN-QSFP-40GBASE-LR4 compatible
- Quanta # 13023 compatible
- Radware # 13024 compatible
- Solarflare QSFP+ MMR4 compatible
What customers say
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!
We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.