200G QSFP56 FR4 with dual CDR 2 km, λ1271-1331 nm, LC-Duplex, Singlemode
Universal QSFP56 Transceiver
Use FLEXBOX to configure to almost any vendor
For 200GBASE-FR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 212.5 Gbit/s
Up to 2 km via Singlemode OS2
LC-Duplex Connector
Specs
- int. Mux
- 2 km
- 212.5 G
- LC
Protocols
- 200G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP56 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | FR4 |
Distance | 2 km |
Temperature Range | 10°C - 60°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 212.5 Gbit/s |
Bandwith Per Lane | 53.13 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 6.5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 4 dB |
Transmit min/max per lane | -4.2 dBm / 4.7 dBm |
Receiver min/max per lane | -8.2 dBm / 4.7 dBm (overload) @200G |
Wavelength TX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
Wavelength RX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
---|---|
Laser | EML |
Receiver Type | PIN |
Modulation | PAM4 @200G |
Transmit and Dispersion Penalty | 3.3 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 200G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
Your vendor / compatibility is missing?
What customers say
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN.
Thank you FLEXOPTIX
Sylvain Brisebois
Advance Research, Senior Firmware Engineer, KINOVA
Woa, i can get next day delivery for any vendor. That’s a game changer. Also thanks for making it a smartphone app, this fits my workflow well.
Arvid Picciani
CEO / devguard GmbH
FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.
Otto Lodewijk
Director, SuitIT
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri
CTO, SGN d.o.o.