100G QSFP28 LR4 ext. with dual CDR 20 km, λ1296-1309 nm, LC-Duplex, Singlemode

Universal QSFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-LR4 ext. Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 103.12 Gbit/s
Up to 20 km via Singlemode OS2
LC-Duplex Connector
Specs
  • int. Mux
  • 20 km
  • 103.12 G
  • LC
Protocols
  • 100G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
Q.161HG.20:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Power Budget
100G QSFP28 LR4 ext. with dual CDR 25 km, λ1296-1309 nm, LC-Duplex, Singlemode 
100G QSFP28 LR4 ext. with dual CDR | 25 km, λ1296-1309 nm, LC-Duplex, Singlemode
24 pcs in stock As low as 1,312.90 EUR
Higher Temperature Range
100G QSFP28 LR4 ext. Industrial with dual CDR 20 km, λ1296-1309 nm, LC-Duplex, Singlemode 
100G QSFP28 LR4 ext. Industrial with dual CDR | 20 km, λ1296-1309 nm, LC-Duplex, Singlemode
0 pcs in stock As low as 1,191.06 EUR
Lower Power Budget
100G QSFP28 LR4 with dual CDR 10 km, λ1296-1309 nm, LC-Duplex, Singlemode 
100G QSFP28 LR4 with dual CDR | 10 km, λ1296-1309 nm, LC-Duplex, Singlemode
1604 pcs in stock As low as 493.76 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR

Specification

Form Factor QSFP28
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code LR4 ext.
Distance 20 km
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 103.12 Gbit/s
Bandwith Per Lane 25.78 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 8.1 dB
Transmit min/max per lane -2.5 dBm / 4.5 dBm
Receiver min/max per lane -10.6 dBm / 4.5 dBm (overload) @100G
Wavelength TX (Typical) 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm
Wavelength RX (Typical) 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm
Laser DML
Receiver Type PIN
Modulation NRZ @100G
Extinction Ratio 4 dB
Supported Protocols 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 1061800720-01 compatible
  • Arista 100GBASE-LR4 compatible
  • Arista 3rd_Party 100GBASE-LR4 compatible
  • Brocade 100G-QSFP28-LR4L-10KM compatible
  • Ciena 160-9401-900 compatible
  • Cisco Systems QSFP-100G-LR4-S compatible
  • Dell QSFP28-100G-LR4 compatible
  • Edge Core QSFP28 LR4 compatible
  • Extreme 100G-LR4-QSFP10KM compatible
  • Extreme 10403 compatible
  • F5 Networks OPT-0039-01 compatible
  • Fortinet FG-TRAN-QSFP28-LR4 compatible
  • HP H3C JL275A compatible
  • Huawei QSFP28 LR4 compatible
  • Infinera (ex. Coriant) ZXS-Q8L4ZZZZ-00 compatible
  • Infinera TOM-100G-Q-LR4 compatible
  • Infinera TOM-100G-Q-LR4L compatible
  • Juniper JNP-QSFP-100G-LR4 compatible
  • Juniper QSFP-100GBASE-LR4 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE10550AA compatible
  • Nokia Networks 3AL82074AA compatible
  • Nvidia (ex. Mellanox) MMA1L10-CR compatible
  • Palo Alto Networks PAN-QSFP28-100GBASE-LR4 compatible
Your vendor / compatibility is missing?

What customers say

FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device.  The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX .  Absolutely brilliant and couldn't ask for more.

Stuart Willson Infrastructure Engineer/ Surrey Satellite Technology Limited
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling. The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Dominik Grueber Hetzner Online GmbH / Network Administrations
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
Michael Nicolaou Senior Network Consultant, CDMA Services Ltd
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede CEO, EC-Hosting
More