100G QSFP28 CWDM4 with dual CDR 2 km, λ1271-1331 nm, LC-Duplex, Singlemode
- int. Mux
- 2 km
- 103.12 G
- LC
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | CWDM4 |
Distance | 2 km |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 103.12 Gbit/s |
Bandwith Per Lane | 25.78 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 3.5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 1.6 dB |
Transmit min/max per lane | -6.5 dBm / 2.5 dBm |
Receiver min/max per lane | -8.1 dBm / 2.5 dBm (overload) @100G |
Wavelength TX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
Wavelength RX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
---|---|
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ @100G |
Transmit and Dispersion Penalty | 3.3 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party QSFP-100G-CWDM4 compatible
- Arista QSFP-100G-CWDM4 compatible
- Arris 1000669 compatible
- Brocade / Ruckus E100G-QSFP28-CWDM4-2km compatible
- Brocade 100G-QSFP28-CWDM4-2KM compatible
- Cisco Systems QSFP-100G-CWDM4-S compatible
- Cisco Systems QSFP-100G-SM-SR compatible
- Cumulus Networks QSFP28 CWDM4 compatible
- Dell (ex. Force10) QSFP28-100G-CWDM compatible
- Dell 407-BBVO compatible
- Edge Core ET7402-CWDM4 compatible
- Extreme 100G-CWDM4-QSFP2KM compatible
- Extreme 10404 compatible
- Fortinet FG-TRAN-QSFP28-LR4 compatible
- Huawei QSFP-100G-CWDM4-ISP compatible
- Infinera TOM-100G-Q-CWDM4 compatible
- Intel SPTSBP3CLCCO compatible
- Juniper JNP-QSFP-100G-CWDM compatible
- Juniper JNP-QSFP-100G-LR4 compatible
- Juniper QSFP-100G-LR4 compatible
- Net Insight NPA0144-CW40 compatible
- NetApp 100G CWDM4 compatible
- Netgear ACM764 compatible
- Nokia (ex. Alcatel-Lucent) 3AL82075AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE10552AA compatible
- Nvidia (ex. Mellanox) MMA1L30-CM compatible
- Viavi (ex. JDSU) QSFP28 CWDM4 compatible
- Alcatel-Lucent Ent. QSFP-100G-CWDM4 compatible
What customers say
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.