100G QSFP28 CWDM4 Industrial with dual CDR 2 km, λ1271-1331 nm, LC-Duplex, Singlemode
Universal QSFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-CWDM4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 103.12 Gbit/s
Up to 2 km via Singlemode OS2
LC-Duplex Connector
Operating Temperature from -40°C to 85°C
Specs
- int. Mux
- 2 km
- 103.12 G
- LC
Protocols
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | CWDM4 |
Distance | 2 km |
Temperature Range | -40°C - 85°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 103.12 Gbit/s |
Bandwith Per Lane | 25.78 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 4.5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 3.5 dB |
Transmit min/max per lane | -6.5 dBm / 2.5 dBm |
Receiver min/max per lane | -10 dBm / 2.5 dBm (overload) @100G |
Wavelength TX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
Wavelength RX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
---|---|
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ @100G |
Transmit and Dispersion Penalty | 3 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems QSFP-100G-SM-SR compatible
- Nokia (ex. Alcatel-Lucent) 3HE10552AA compatible
Your vendor / compatibility is missing?
What customers say
Since we ordered a FLEXBOX, our life as definitly changed.
There’s a before and an after FLEXBOX.
So many vendors in the compatibility matrice, so easy way to configure the module!
And the cables and accessories came also with quality.
Stéphane Gouron
Directeur Agence Ouest, S-cube.
Just wanted to express my giddy happiness at how fast your crack team of ninjas were able to get optics to my desk.
Donal Cunningham
Senior Network Engineer - Airspeed Telecom
Great products. When you hold them in your hands, you see the care for qualitiy and product details. I strongly recommend Flexoptix' products.
Dariusz Siedlecki
Nettec
On more than one occasion the flexbox significantly saved time for me by not having to scrub a deployment session but simply reconfigure a transceiver and carry on. This alone is a good reason that secures the flexbox a non-negotiable place in my datacenter-go-bag. However what really sets flexoptix apart is not them solving an irritating problem we all know. No. It is their vast inventory and know-how paired with impeccable QA. If I have a need for transceivers it is my single go-to source for procurement. They have exactly what I need in stock even before I know I need it, and when I need it, I can trust the order is in my hands in no time. Every single time. I can configure and deploy without doubt and without delay. It is rare to find such a valuable and dependable partner that reliably takes away a whole set of problems while offering decent pricing and a customer support that is above reproach.
Michael Horn
Telecommunications Infrastructure Security Professional