25G SFP28 BiDi ER Industrial with dual CDR 40 km, ᵀˣ1270 / ᴿˣ1310 nm, LC-Simplex, Singlemode
Universal SFP28 BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 25GBASE-ER Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 25.78 Gbit/s
Up to 40 km via Singlemode OS2
LC-Simplex Connector
Operating Temperature from -40°C to 85°C
Specs
- 1270 nm
- 40 km
- 25.78 G
- Industrial
Protocols
- 25G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP28 |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Singlemode BiDi |
Compliance Code | BiDi ER |
Distance | 40 km |
Temperature Range | -40°C - 85°C |
Bandwidth | 25.78 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1.5 W |
CDR | TX and RX |
---|---|
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 18 dB |
Transmit min/max per lane | -1 dBm / 6 dBm |
Receiver min/max per lane | -19 dBm / -4 dBm (overload) @25G |
Wavelength TX (Typical) | 1270 nm |
Wavelength TX (Range) | 1260 - 1280 nm |
Wavelength RX (Typical) | 1310 nm |
Wavelength RX (Range) | 1300 - 1320 nm |
---|---|
Laser | DFB |
Receiver Type | APD |
Modulation | NRZ @25G |
Transmit and Dispersion Penalty | 2.7 dB |
Extinction Ratio | 4 dB |
Supported Protocols | 25G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems SFP-25G-LR-S compatible
- Dell 407-BBWK compatible
Your vendor / compatibility is missing?
What customers say
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen
Infrastructure Engineer, Previder B.V
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri
CTO, SGN d.o.o.
Working with the FLEXOPTIX Transceivers and FLEXBOX is not only uncomplicated but offers us the possibility of working with many vendor types to support the different campus networks. Thanks guys - awesome work.
Brian Masiga
Network Engineer, Research and Education Network for Uganda
Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your Flexbox is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
Mark van den Berg
CTO - Icera Networks