10G SFP+ LR Industrial 10 km, λ1310 nm, LC-Duplex, Singlemode

Universal SFP+ Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-LR Ethernet links
Supported Data Rates: 600 Mbit/s - 11.3 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Operating Temperature from -40°C to 85°C
Specs
  • 1310 nm
  • 10 km
  • 11.3 G
  • Industrial
Protocols
  • 10G ETH
  • 10G FC
  • 1G ETH
  • 8G FC
  • CPRI
  • OBSAI
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
P.1396.10.I:Sx
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP+
Connector / Polish LC-Duplex PC
Interface Singlemode
Type LR
Distance 10 km
Temperature Range -40°C - 85°C
Bandwidth 600 Mbit/s - 11.3 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 6.2 dB
Transmit min/max per lane -8.2 dBm / 0.5 dBm
Receiver min/max per lane -14.4 dBm / 0.5 dBm (overload)
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1270 - 1355 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1260 - 1565 nm
Laser DFB
Receiver Type PIN
Modulation NRZ
Transmit and Dispersion Penalty 3.2 dB
Extinction Ratio 3.5 dB
Supported Protocols 10G Ethernet, 10G FC, 8G Fibre Channel, Gigabit Ethernet, LTE 0.614G CPRI, LTE 0.768G OBSAI, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • A10networks AXSK-SFP+ LR compatible
  • Accedian Networks 7SN-500 compatible
  • ADTRAN 1442410G1 compatible
  • ADVA # 12207 compatible
  • Alcatel-Lucent Ent. SFP-10G-LR compatible
  • Allied Telesis AT-SP10LR/I compatible
  • Arista 3rd_Party SFP-10G-LR compatible
  • Arista SFP-10G-LR compatible
  • Arris 801146 compatible
  • Aruba Networks(ex. HP Network) J9151A compatible
  • Avaya (ex. Nortel) AA1403011-E6 compatible
  • Broadcom SFP+ LR compatible
  • Brocade / Ruckus 10G-SFPP-LR compatible
  • Brocade 10G-SFP-LR compatible
  • Calix 100-01512 compatible
  • Cambium Networks SFP-10G-LR compatible
  • Check Point CPAC-TR-10LR compatible
  • Chelsio SM10G-LR compatible
  • Ciena 160-9103-900 compatible
  • Ciena XCVR-S10V31 compatible
  • Cisco (ex. Meraki) MA-SFP-10GB-LR compatible
  • Cisco Systems ONS-SC+-10G-LR compatible
  • Cisco Systems SFP-10G-LR compatible
  • Cisco Systems SFP-10G-LR-X compatible
  • CTC Union ISFP-S9010-31-DE compatible
  • Cumulus Networks SFP+ LR compatible
  • D-LINK DEM-432XT compatible
  • Dell (ex. Force10) # 12221 compatible
  • Dell 407-BBOP compatible
  • Edge Core ET5402-LR-I compatible
  • Ericsson RDH10265/3 compatible
  • Extreme (ex. Enterasys) # 12217 compatible
  • Extreme 10302 compatible
  • F5 Networks OPT-0017 compatible
  • FibroLAN SFPP-13-10 compatible
  • Fluke Networks # 12220 compatible
  • Fortinet FG-TRAN-SFP+LR compatible
  • Fujitsu # 12223 compatible
  • Hirschmann M-SFP-10-LR/LC EEC compatible
  • HP H3C JD094B compatible
  • Huawei eSFP-GE-LX-SM1310 compatible
  • Huawei OSX010000 compatible
  • Infinera (ex. Transmode) TRX100101 compatible
  • Intel E10GSFPLR compatible
  • Juniper EX-SFP-10GE-LR compatible
  • Juniper QFX-SFP-10GE-LR compatible
  • Juniper SFP-10GE-LR compatible
  • Juniper SFPP-10GE-LR compatible
  • Juniper SFPP-10GE-LR-IT compatible
  • Juniper SRX-SFP-10GE-LR compatible
  • Keymile 37973320 compatible
  • KTI Networks # 12230 compatible
  • LANCOM SFP-LX-LC10 compatible
  • Lenovo (ex. Blade Network) # 12226 compatible
  • LevelOne # 12232 compatible
  • MikroTik S+31DLC10D compatible
  • Motorola # compatible
  • Moxa SFP-10GLRLC-T compatible
  • MRV # 12235 compatible
  • Net Insight NPA0077-LRD1 compatible
  • NetApp X6569-R6 compatible
  • NetApp X6588-R6 compatible
  • NetApp X6601A-R6 compatible
  • Netgear AXM762 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB390930002 compatible
  • Nokia (ex. Alcatel-Lucent) 3FE62600AA compatible
  • Nokia (ex. Alcatel-Lucent) 3HE04823AA compatible
  • Nokia (ex. Alcatel-Lucent) 3HE09327AA compatible
  • Nokia Networks 474901A.101 compatible
  • Nokia Networks 475339A.101 compatible
  • Nokia Networks FOSP 472949A.101 compatible
  • Nokia Networks FOTB 473472A.101 compatible
  • Nokia Networks P206994 compatible
  • Nokia Siemens Networks # 12237 compatible
  • Nvidia (ex. Mellanox) # compatible
  • OpenGear SFP+LR compatible
  • Oracle # compatible
  • Packetlight SL110 compatible
  • Packetlight SL112 compatible
  • Palo Alto Networks PAN-SFP-PLUS-LR compatible
  • Planet MTB-TLR compatible
  • QNAP SFP+ LR compatible
  • RAD SFP-P-1DH compatible
  • RAD SFP-P-6DH compatible
  • Radware # 12239 compatible
  • Ribbon (ex. ECI) OTP10_LR compatible
  • SAF Tehnika I0AOM005 compatible
  • Solarflare SFM10G-LR compatible
  • Supermicro # 12240 compatible
  • TP-LINK # compatible
  • TP-LINK TL-SM5110-LR compatible
  • Transition Networks # compatible
  • Ubiquiti Networks UF-SM-10G compatible
  • ZeeVee Z4KSFP10G31-10K compatible
  • Zyxel SFP10G-LR compatible
Your vendor / compatibility is missing?

What customers say

For years we struggled with hundreds of transceivers from different vendors but this is finally over! With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle Director Infrastructure Services, Avira Operations GmbH & Co.KG
Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your Flexbox is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
Mark van den Berg CTO - Icera Networks

I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.

One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.

Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.

This is simply a brilliant idea and product! Thank you!

Michal Szarecki IT Engineer/ pmitsolutions.ie

I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.

Denis Kempeneers Network Consultant-globalnetwork.tech
More