32G Fibre Channel SFP28 Industrial with dual CDR 10 km, λ1310 nm, LC-Duplex, Singlemode
SFP28
32G FC LW
Universal Fibre Channel SFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
Fibre Channel (FC) support for storage area network (SAN) interconnect
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 25.78 Gbit/s - 28.05 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Operating Temperature from -40°C to 85°C
Specs
- 1310 nm
- 10 km
- 28.05 G
- Industrial
Protocols
- 25G ETH
- 32G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | 32G FC LW |
| Distance | 10 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 25.78 Gbit/s - 28.05 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1.5 W |
| CDR | TX and RX |
|---|---|
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 8.3 dB |
| Transmit min/max per lane | -5 dBm / 2 dBm |
| Receiver min/max per lane | -13.3 dBm / 2 dBm (overload) @32G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1295 - 1325 nm |
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1370 nm |
|---|---|
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @32G |
| Transmit and Dispersion Penalty | 2.7 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 25G Ethernet, 32G Fibre Channel |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Brocade XBR-000238 compatible
- Ciena 160-9701-900 compatible
- Cisco Systems DS-SFP-FC32G-LW compatible
- Pure Storage FA-XR2-32G-FC-SFP-LR compatible
Your vendor / compatibility is missing?
What customers say
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
René Oskar Kühne
Retired scientist, now acting in the field of IT support, R.O. Kuehne
The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!
Viktor Ekmark
Cloud Infrastructure Engineer / Elastx AB
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren
Technical Consultant, IP Visie Networking B.V.
You guys rock! I have had the opportunity to use the previous version of FLEXBOX with my previous company. I cannot believe the progress you have made just in a year. Battery pack? Mobile reconfiguration? I am truly feeling lucky to have met you guys at Cloudfest. I will be honoured to demonstrate your products to startups as great examples to contribute to tech sustainability.
Murat Aybars
Founder / Ideatomy