10G SFP+ CWDM ER Industrial ~40 km / 14.8 dB, 1470 nm - 1610 nm, LC-Duplex
- CWDM
- ~40 km / 14.8 dB
- 11.3 G
- Industrial
- 10G ETH
- 10G FC
- 1G ETH
- 2G FC
- 4G FC
- 8G FC
- CPRI
- OBSAI
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP+ |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Compliance Code | CWDM ER |
Distance | 40 km |
Temperature Range | -40°C - 85°C |
Bandwidth | 614 Mbit/s - 11.3 Gbit/s |
Digital Diagnostic Management (DDM) | Internally Calibrated |
Power Consumption | 1.65 W |
---|---|
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 14.8 dB |
Transmit min/max per lane | -1 dBm / 3 dBm |
Receiver min/max per lane | -15.8 dBm / -1 dBm (overload) @10G |
Wavelength TX (Typical) | Channel R - 1610 nm |
Wavelength RX (Range) | 1464.5 - 1617.5 nm |
Laser | EML |
---|---|
Receiver Type | PIN |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 2 dB |
Chromatic Dispersion Tolerance | 0 ps/nm to 800 ps/nm @10G |
Extinction Ratio | 8.2 dB |
Supported Protocols | 10G Ethernet, 10G FC, 2G Fibre Channel, 4G Fibre Channel, 8G Fibre Channel, Gigabit Ethernet, LTE 0.614G CPRI, LTE 0.768G OBSAI, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Aruba Networks(ex. HP Network) J9153A compatible
- Intel E10GSFPER compatible
- Juniper SFP-10GE-LR compatible
- MikroTik S+31DLC10D compatible
- Netgear AXM762 compatible
- Nokia (ex. Alcatel-Lucent) 3FE62600DA compatible
- Waystream (ex. Packetfront) SFP-10GE-LR compatible
What customers say
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.